Archive for 11/01/2013 - 12/01/2013

How to put your device in DFU mode?[for Broken buttons too]

**TRY AT YOUR OWN RISK.BUT UPTO NOW NO COMPLAINTS**

Meaning(if you need to know):
DFU mode = Device Firmware Update mode

DFU mode is a mode where the iPod Touch/iPhone will be made to force a restore of the firmware into whatever version firmware it is given.

**Getting your iPod Touch/iPhone into DFU mode is somewhat tricky, and it may require some patience/practice because timing is essential to get it to DFU mode and not into recovery mode. **


A)IF YOUR POWER AND HOME BUTTONS ARE WORKING TRY THESE STEPS OR GO BELOW:
1. First, Open up iTunes, plug in your iPod Touch/iPhone to the CPU's USB port. make sure your system sound are compatible for your ears to ears to listen iphone plug in/out sound.

2. Hold down the Home button (top left for iPod Touch and top right for the iPhone with the screen facing you) and the Power button (located on the front bottom of your iPod Touch/iPhone) simutaneously, until the screen goes black and the device turns off. (past the red slider/slide to power off screen)

3. Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.

4. After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device, now iTunes should recognize it in DFU mode.

5. After iTunes recognizes the iPod Touch/iPhone, let go of the Home button otherwise it will go into recovery mode and you will have to do the entire DFU process over again.

6. You will know when you have put your iPod Touch/iPhone correctly into DFU mode when the display is blank and that you do not have anything on your device.

And you are done, now you can install any iPod Touch/iPhone firmware on to your device via the iTunes SHIFT recovery method.

B)IF YOUR POWER BUTTON OR HOME BUTTON ARE NOT WORKING FOLLOW THESE STEPS:

These are instructions on how to put your iPhone, iPad, or iPod touch into DFU mode with a broken home or power button.
1)Create a new folder on your desktop called Pwnage.then,In the folder place the most recent firmware (which can be downloaded from many websites click here) and the latest version of RedSn0w (from here).Extract the RedSn0w zip file to the Pwnage folder.
2)Launch the redsn0w application from the redsn0w folder we extracted earlier. You can do this by right clicking the executable and selecting Run as Administrator contextual menu.Once RedSn0w opens click the Extras button.Choose Even More from the Extras menu.
3)Select DFU IPSW from the Even More menu.


You will be instructed to select an IPSW that you can currently restore to without any hacks or pwnage steps. Click OK.
4)Select the ipsw firmware file you downloaded in Step One and click Open.RedSn0w will now proceed to create a DFU Mode IPSW.You will be notified once the IPSW has been created successfully. Click the OK button.
5)Launch iTunes + Connect your device to the computer and select it from list of devices on the left. If you haven't performed a backup recently, perform one now. Next, make sure you are on the Summary then hold down the Shift key and click Restore.
6)Select the ENTER_DFU ipsw from the Pwnage folder on your desktop and click the Open button.
After your device has been restored it will be dumped into DFU mode. The screen will remain black and you may be able to jailbreak depending on the firmware you've restored to.


Other users seeing this also saw these posts below:                                                          
1.want to jailbreak your iphone for free? click here for instructions.
2.want to install skype in your old ios versions?  click here for instructions.
3.jailbreaking your iphone first time or getting errors through  our old post jailbreaking instructions? click here

How to downgrade your iphone to old IOS versions and jailbreak it to stop OTA update.

**NOTE: i am not responsible for anything impossible that might happen to your iphone**
Ok,just we have a sucessful downgrade of ios 6.1.3.and 6.1.2 both to 5.1.l. we can also do it for non jailbreakon users but the software update will start downloading the lastest ios by apple's OTA update,so i think its impossible to stop that software update for non-jailbroken iphone.we tried our old post's method(by using Sn0wbreeze) but itunes says errors like 1602,3194,....etc because apple won't give us to downgrade.So its important for us all to know how can we downgrade and jailbreak devices having such errors.follow the steps below(steps seems longer but may make you success if you strictly follow them:

1.download ifaith from here and open it: click here
2. click on "show Available SHSH caches on server" like shown in picture below.
3.now you will see available downgradable signed versions which were caught from apple before for your device as shown in picture below.
select the frimware which you want to downgrade or select just available jailbreakable one.
4.now,ifaith will download the available blobs to your desktop.so now go back main menu of your ifaith and click on "Build*signed* IPSW w/Blobs".then select "browse for SHSH blobs".after that it will start to download the IPSW files required to restore your iphone....let it download.now after the download you will see an file named"00000392FA10_iFaith_iPhone_3GS-5.1.1_(9B206)_signed.ipsw"on your desktop of pc.
 5)Grab your iphone and put it in DFU mode.if you don't know how see this guide by clicking here.After that open itunes and press "shift" + "ctrl" key of your keyboard.and it will bring browse window for you.select the .IPSW file that ifaith has made by using blobs.and let the itunes do its job.You will not see any errors.
**If you see any errors while restoring iphone through itunes,download another SHSH blobs and create new IPSW from that blobs that will work for you.Or,repeat steps 1,2,3&4 again but choose another frimware version to download**
6)Iphone turns on ,after that your iphone remains to be activated.so we will use redsn0w to jailbreak.click here to download it.
7)Open redsn0w that u have downloaded and put the iphone in DFU mode.after that click jailbreak button of redsn0w.
8)let redsn0w software do its works.And at last it says "done!!" in your PC's screen but it goes on working on iphone.well,wait and see until your iphone Boots completely.
9) same slide to unlock screen?? as before and same questions asked like before activation??.BUT,well now you are given to pass through those screen just keep on clicking next and all,NO NEED TO WORRY.
10)open cydia and let it download + update its components completely then,goto search of cydia and search for "ultrasnow" so that your sim reads.after that search "no update" in cydia and install it to stop the apple's forcing OTA updates.and dont ignore it,its important or you may get updated and loose your jailbreak again.............
                                                WELL ENJOY!!
                                By: Aakash Nepal:(enjoying and trying with you:)                                                          


Other users seeing this also saw these posts below:                                                                  
1.want to jailbreak your iphone for free? click here for instructions.
2.want to install skype in your old ios versions?  click here for instructions.
3.dont know how to put your iphone in DFU mode? click here for instructions.

Popular Post

Blogger templates

- Copyright © iPhone's helper -DashPageTeam- Current web Status: Safemode 1.0 - Designed by DashPageTeam -