How to put your device in DFU mode?[for Broken buttons too]

**TRY AT YOUR OWN RISK.BUT UPTO NOW NO COMPLAINTS**

Meaning(if you need to know):
DFU mode = Device Firmware Update mode

DFU mode is a mode where the iPod Touch/iPhone will be made to force a restore of the firmware into whatever version firmware it is given.

**Getting your iPod Touch/iPhone into DFU mode is somewhat tricky, and it may require some patience/practice because timing is essential to get it to DFU mode and not into recovery mode. **


A)IF YOUR POWER AND HOME BUTTONS ARE WORKING TRY THESE STEPS OR GO BELOW:
1. First, Open up iTunes, plug in your iPod Touch/iPhone to the CPU's USB port. make sure your system sound are compatible for your ears to ears to listen iphone plug in/out sound.

2. Hold down the Home button (top left for iPod Touch and top right for the iPhone with the screen facing you) and the Power button (located on the front bottom of your iPod Touch/iPhone) simutaneously, until the screen goes black and the device turns off. (past the red slider/slide to power off screen)

3. Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.

4. After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device, now iTunes should recognize it in DFU mode.

5. After iTunes recognizes the iPod Touch/iPhone, let go of the Home button otherwise it will go into recovery mode and you will have to do the entire DFU process over again.

6. You will know when you have put your iPod Touch/iPhone correctly into DFU mode when the display is blank and that you do not have anything on your device.

And you are done, now you can install any iPod Touch/iPhone firmware on to your device via the iTunes SHIFT recovery method.

B)IF YOUR POWER BUTTON OR HOME BUTTON ARE NOT WORKING FOLLOW THESE STEPS:

These are instructions on how to put your iPhone, iPad, or iPod touch into DFU mode with a broken home or power button.
1)Create a new folder on your desktop called Pwnage.then,In the folder place the most recent firmware (which can be downloaded from many websites click here) and the latest version of RedSn0w (from here).Extract the RedSn0w zip file to the Pwnage folder.
2)Launch the redsn0w application from the redsn0w folder we extracted earlier. You can do this by right clicking the executable and selecting Run as Administrator contextual menu.Once RedSn0w opens click the Extras button.Choose Even More from the Extras menu.
3)Select DFU IPSW from the Even More menu.


You will be instructed to select an IPSW that you can currently restore to without any hacks or pwnage steps. Click OK.
4)Select the ipsw firmware file you downloaded in Step One and click Open.RedSn0w will now proceed to create a DFU Mode IPSW.You will be notified once the IPSW has been created successfully. Click the OK button.
5)Launch iTunes + Connect your device to the computer and select it from list of devices on the left. If you haven't performed a backup recently, perform one now. Next, make sure you are on the Summary then hold down the Shift key and click Restore.
6)Select the ENTER_DFU ipsw from the Pwnage folder on your desktop and click the Open button.
After your device has been restored it will be dumped into DFU mode. The screen will remain black and you may be able to jailbreak depending on the firmware you've restored to.


Other users seeing this also saw these posts below:                                                          
1.want to jailbreak your iphone for free? click here for instructions.
2.want to install skype in your old ios versions?  click here for instructions.
3.jailbreaking your iphone first time or getting errors through  our old post jailbreaking instructions? click here

How to downgrade your iphone to old IOS versions and jailbreak it to stop OTA update.

**NOTE: i am not responsible for anything impossible that might happen to your iphone**
Ok,just we have a sucessful downgrade of ios 6.1.3.and 6.1.2 both to 5.1.l. we can also do it for non jailbreakon users but the software update will start downloading the lastest ios by apple's OTA update,so i think its impossible to stop that software update for non-jailbroken iphone.we tried our old post's method(by using Sn0wbreeze) but itunes says errors like 1602,3194,....etc because apple won't give us to downgrade.So its important for us all to know how can we downgrade and jailbreak devices having such errors.follow the steps below(steps seems longer but may make you success if you strictly follow them:

1.download ifaith from here and open it: click here
2. click on "show Available SHSH caches on server" like shown in picture below.
3.now you will see available downgradable signed versions which were caught from apple before for your device as shown in picture below.
select the frimware which you want to downgrade or select just available jailbreakable one.
4.now,ifaith will download the available blobs to your desktop.so now go back main menu of your ifaith and click on "Build*signed* IPSW w/Blobs".then select "browse for SHSH blobs".after that it will start to download the IPSW files required to restore your iphone....let it download.now after the download you will see an file named"00000392FA10_iFaith_iPhone_3GS-5.1.1_(9B206)_signed.ipsw"on your desktop of pc.
 5)Grab your iphone and put it in DFU mode.if you don't know how see this guide by clicking here.After that open itunes and press "shift" + "ctrl" key of your keyboard.and it will bring browse window for you.select the .IPSW file that ifaith has made by using blobs.and let the itunes do its job.You will not see any errors.
**If you see any errors while restoring iphone through itunes,download another SHSH blobs and create new IPSW from that blobs that will work for you.Or,repeat steps 1,2,3&4 again but choose another frimware version to download**
6)Iphone turns on ,after that your iphone remains to be activated.so we will use redsn0w to jailbreak.click here to download it.
7)Open redsn0w that u have downloaded and put the iphone in DFU mode.after that click jailbreak button of redsn0w.
8)let redsn0w software do its works.And at last it says "done!!" in your PC's screen but it goes on working on iphone.well,wait and see until your iphone Boots completely.
9) same slide to unlock screen?? as before and same questions asked like before activation??.BUT,well now you are given to pass through those screen just keep on clicking next and all,NO NEED TO WORRY.
10)open cydia and let it download + update its components completely then,goto search of cydia and search for "ultrasnow" so that your sim reads.after that search "no update" in cydia and install it to stop the apple's forcing OTA updates.and dont ignore it,its important or you may get updated and loose your jailbreak again.............
                                                WELL ENJOY!!
                                By: Aakash Nepal:(enjoying and trying with you:)                                                          


Other users seeing this also saw these posts below:                                                                  
1.want to jailbreak your iphone for free? click here for instructions.
2.want to install skype in your old ios versions?  click here for instructions.
3.dont know how to put your iphone in DFU mode? click here for instructions.

How to install skype and viber on iphone 3g ios 3.1.3:




1. Jailbreak  your iphone using sn0wbreeze for iOS 3.2.2 / 4.1 (you can download it by clicking here)
2. Download applications - here:
click here for Viber

3. Installation guide : using with the iTunes - need to be installed "AppSync for 4.0+" on your iPod touch / iPhone from cydia :(Cydia-sourse:http://repo.insanelyi.com)
***make sure you get a backup of your applications before this steps because your iPhone gets sync***

###now here's how to install skype app from itunes###
1. Open iTunes in your PC.
2. Inside iTunes : Goto "Library" -> "Apps"
3. Click and Drag your "skype.ipa" there
4. Now Connect your iPod/iPhone to your PC
5. Goto  "Devices" -> "Your iPod/iPhone" -> "Apps" (on the top)
6. Mark "Sync Apps" and remember to choose skype
7. Press Sync then you are done

**remember while syncing your device,all your application which were in your device may get erased and we are not responsible for that**

Other users seeing this also saw these posts below:                                                            
1.want to jailbreak your iphone for free? click here for instructions.
2.dont know how to put your iphone in DFU mode? click here for instructions.
3.jailbreaking your iphone first time or getting errors through  our old post jailbreaking instructions? click here

Tips to save the iphone 4s battery


The iPhone 4S has been plagued with battery life issues since it launched in October.
Apple has been working on fixing these battery life issues with the iOS 5.0.1 update  for most iPhone 4S owners.
I shared how to get better iPhone 3G battery life, but this tip can help those of you who are experiencing horrible battery life even after using these tips.
I can’t promise this will fix every iPhone 4S battery issue, but it was able to fix my horrible iPhone 4S battery life.
Unlike others, I had good battery life to begin with, but after a few weeks of use my iPhone 4S battery life plummeted so much that it didn’t last to the end of the day.
After looking at my iPhone 4S battery usage, I discovered that the iPhone 4S was using my battery the same amount of time it was on standby. Here’s how I fixed my bad iPhone 4S battery life.
These tips are most helpful if you used to have bad battery life, but Step 2 is worth a shot for all iPhone 4S owners who have bad battery life.

Uninstall Recent Apps

If you recently installed a number of apps, one of them could have a bug that is keeping your iPhone 4S from entering standby, thus eating your battery life like the Cookie Monster in a Keebler Elf factory.
Uninstall apps
Hold down on your recent apps, and when they start to jiggle tap the X. I also did Step two at the same time to get this fixed up fast, but you can stop here and go for a day if you want to test it out. If battery life improves, you can start installing those apps again, one at a time.

Reset All Settings

If you want to fix sudden onset iPhone 4S battery life issues, a settings reset is the easiest way to clean things up without doing a full restore. The nice part about this battery life fix is that you can do it right on your phone in just a few minutes. The whole settings reset took me about 5 minutes. You won’t be able to use your iPhone while this is happening.
1. Tap on Settings.
2. Go to General.
3. Scroll to the bottom and tap on Reset.
iPhone 4S Settings Reset
4. Tap Reset All Settings.
5. Enter any passcodes you are asked for.
6. Wait for the process to complete.
You will need to go through and re-do any setting tweaks you have made, but all of your apps, media and data will still be in place.
This solved the bad iPhone 4S battery life for me.
Update: For those asking, I am seeing around 4 hours of use and around 16 hours of standby.


Other users seeing this also saw these posts below:                                                          
1.want to jailbreak your iphone for free? click here for instructions.
2.want to install skype in your old ios versions?  click here for instructions.
3.Dont know how to put your device in DFU mode? click here for instructions.
4.jailbreaking your iphone first time or getting errors through  our old post jailbreaking instructions? click here

instructions for upgrading iphone 3g/2g/1g to whited00r's software i.e.5.0.1


make your iphone 3g/2g/1g run with apples ios 5

Just follow the steps below--
1)choose the firmwares from below
--If you need to unlock the device :(unlock-- make the iphone read your unregistered carrier/sim )
Download 5.0.1 unlocked for iphone 3g
--Download 5.0.1 for iphone 2g
--download 5.0.1 for iphone 1g

---if your iphone supports your current sim then..
Download 5.0.1 for iphone 3g
--download 5.0.1 for iphone 2g
--download 5.0.1 for iphone 1g

##make sure you have saved it on desktop###
***then open itunes and put the iphone in dfu mode(if you dont know how to put it in dfu click here) then follow the steps below:**
1)hold shift botton and click restore in the itunes in the iphone's menu
2)a window will pop up to select the downloaded software..so select it and click ok..
3)iphone will be restored and a new software will be added so let the itunes complete its job after it...
4)itunes will ask you to choose whether to set iphone as a new or backup it as old software...(choose new one or you can get error no.65)
5) you are done and ready to serve the faster and ios 5 like functions but it will still be on ios 3.1.3..
***if you get error 65 your iphone will not be read to itunes and by computer... Restart the computer.. Let the iphone be in dfu mode again then reinstall the software...**
**Use dap10beta premium from net for free and download from it, if you have low network**


Other users seeing this also saw these posts below:                                                          
1.want to jailbreak your iphone for free? click here for instructions.
2.want to install skype in your old ios versions?  click here for instructions.
3.Dont know how to put your device in DFU mode? click here for instructions.
4.jailbreaking your iphone first time or getting errors through  our old post jailbreaking instructions? click here

Popular Post

Blogger templates

- Copyright © iPhone's helper -DashPageTeam- Current web Status: Safemode 1.0 - Designed by DashPageTeam -